Edison-Opto

Edison-Opto, formally Edison Opto Corporation, is a Taiwan-based optoelectronics manufacturer established in October 2001. The company focuses primarily on the research, manufacture, and distribution of high-power light-emitting diode components and modules. Its products are used across a broad range of lighting applications, including portable lighting, specialty lighting, architectural and building illumination, commercial lighting, and outdoor lighting. The company operates across several related areas of optoelectronics rather than limiting itself to a single finished-lighting category. Its portfolio includes high-power LED packages, LED lighting devices and modules, optical sensors, and Optical SPDIF products. The optical sensor products are intended for applications such as digital cameras and personal digital assistants, while Optical SPDIF components support digital audio and signal transmission interfaces used in acoustic systems, mobile phones, and personal-computer mainboards. Edison-Opto expanded its manufacturing and operating footprint during the 2000s. Dongguang Edison Opto was established in July 2006, followed by Yangzhou Edison Opto in September 2009. These additions gave the company a presence connected to mainland Chinese manufacturing and business operations while its corporate base remained in Taipei. The company also obtained RoHS certification in August 2005, reflecting its alignment with restrictions on hazardous substances in electronic products. The company became publicly listed in Taiwan in the fourth quarter of 2010. The listing marked a significant transition from a privately established LED manufacturer to a publicly traded participant in the growing solid-state lighting industry. In the same year, Edison-Opto was included in Forbes Asia's selection of the 200 Best Companies Under a Billion, according to the referenced company history. A notable development in the company's service offering was the launch of its LDMS program in the first quarter of 2011. LDMS integrates four technical disciplines required in LED lighting applications: thermal management, electrical design, mechanical refinement, and optical optimization. Rather than treating the LED package as an isolated component, the program positions Edison-Opto as a provider of application-level engineering and lighting-system support. Edison-Opto has also emphasized measurement and product-safety capabilities. It received approval for an EPA LM-80 laboratory in the fourth quarter of 2011 and obtained approval for a UL safety laboratory in September 2012. The company established a photometric testing and product safety laboratory, with the UL-certified capability intended to support more rigorous validation of lighting products and components. Its brand positioning is therefore centered on technically engineered LED solutions, high-power optical components, system integration, testing, and application support. The available reference material does not provide current revenue figures, a current executive roster, a current corporate website, or detailed information about the company's present ownership structure. Edison-Opto should consequently be understood as an active Taiwan-origin LED and optoelectronics brand whose documented business spans components, modules, sensors, digital optical interfaces, and lighting engineering services.

Edison Opto Corporation was founded in Taipei in October 2001 as an optoelectronics company focused on high-power light-emitting diode technology. Its documented business model combined research and development with manufacturing and distribution, allowing it to supply both individual LED components and integrated lighting devices or modules. This positioned the company within the expanding solid-state lighting sector, where high-power LEDs were being adopted in portable, specialty, architectural, commercial, and outdoor applications. The company broadened its product scope beyond lighting. Its portfolio included optical sensors for devices such as digital cameras and personal digital assistants, as well as Optical SPDIF products used in digital audio and signal-transmission interfaces. These products served acoustic systems, mobile phones, and personal-computer mainboards. The range indicates that Edison-Opto's historical identity was broader than that of a finished-lighting brand: it was also a component and optoelectronic-interface supplier. A significant early compliance milestone came in August 2005, when Edison-Opto received RoHS certification. The certification supported the company's participation in electronics supply chains affected by restrictions on hazardous substances. The company then expanded its organizational and manufacturing presence in mainland China. Dongguang Edison Opto was established in July 2006, and Yangzhou Edison Opto followed in September 2009. Edison-Opto entered a new corporate phase in 2010. It was included in Forbes Asia's 200 Best Companies Under a Billion, as recorded in the available company history, and completed its initial public offering in Taiwan in the fourth quarter of that year. The public listing provided a formal capital-market presence and marked the company's development from a privately established manufacturer into a listed LED-industry company. In 2011, Edison-Opto expanded from component supply toward integrated lighting application support through LDMS. The program began in the first quarter of the year and combined four disciplines: thermal management, electrical scheme or design, mechanical refinement, and optical optimization. These disciplines address the practical challenges of deploying high-power LEDs, including heat dissipation, power delivery, physical integration, and light distribution. LDMS therefore represented an application-engineering approach intended to connect LED technology with complete lighting requirements. Quality assurance and testing became another documented area of investment. Edison-Opto established a photometric testing and product-safety laboratory, and it received EPA LM-80 laboratory approval in the fourth quarter of 2011. In September 2012, it received approval for a UL safety laboratory. Together, these developments reinforced a positioning based not only on manufacturing capacity but also on measurement, reliability, compliance, and safety validation. The supplied reference material does not describe later corporate events, current products by model number, current management, ownership changes, financial performance, or present operating status in detail. On the available evidence, Edison-Opto is best characterized as a Taiwan-origin, internationally oriented high-power LED and optoelectronics manufacturer with operations connected to Taiwan and mainland China, a listed-company history, and a documented emphasis on integrated LED lighting engineering.

• 2012

  UL safety laboratory approval obtained

  [1]Edison-Optoen.wikipedia.org

  The company received UL safety laboratory approval in September 2012.

• 2011

  LDMS program launched

  [1]Edison-Optoen.wikipedia.org

  The company began the LDMS service program, integrating thermal, electrical, mechanical, and optical engineering for LED lighting applications.

• 2011

  EPA LM-80 laboratory approval obtained

  [1]Edison-Optoen.wikipedia.org

  Edison-Opto received approval for an EPA LM-80 laboratory in the fourth quarter of 2011.

• 2010

  Forbes Asia recognition and Taiwan listing

  [1]Edison-Optoen.wikipedia.org

  Edison-Opto was included in Forbes Asia's 200 Best Companies Under a Billion and completed its Taiwan Stock Exchange IPO in the fourth quarter.

• 2009

  Yangzhou Edison Opto established

  [1]Edison-Optoen.wikipedia.org

  Yangzhou Edison Opto was established in September 2009.

• 2006

  Dongguang Edison Opto established

  [1]Edison-Optoen.wikipedia.org

  A Dongguang Edison Opto entity was established in July 2006 as part of the company's operating expansion.

• 2005

  RoHS certification received

  [1]Edison-Optoen.wikipedia.org

  The company received RoHS certification in August 2005.

• 2001

  Company established

  [1]Edison-Optoen.wikipedia.org

  Edison Opto Corporation was established in October 2001 in Taipei, Taiwan, with a focus on high-power LED and optoelectronics research, manufacturing, and distribution.

A technically oriented Taiwan-based optoelectronics and LED manufacturer serving component, module, lighting-equipment, and application-engineering markets. Its documented differentiation includes high-power LED expertise, integrated thermal/electrical/mechanical/optical design through LDMS, and laboratory-based photometric and safety validation.

• LED components

  High-power LED components

  High-power light-emitting diode components form the core of Edison-Opto's documented business. They are intended for demanding illumination applications where output, thermal control, optical performance, and reliability are important. The components can be incorporated into portable, specialty, architectural, commercial, and outdoor lighting equipment.

• Lighting systems and modules

  LED lighting devices and modules

  Edison-Opto supplies LED lighting devices and modules for integration into lighting equipment. The documented application areas include portable products, special-purpose lighting, building and architectural lighting, commercial illumination, and outdoor lighting. These offerings extend the company from discrete components into more application-ready assemblies.

• Optoelectronic sensors

  Optical sensors

  The company's optical-sensor products are used in optoelectronic applications, including digital cameras and personal digital assistants. They represent a non-lighting portion of Edison-Opto's historical product portfolio and demonstrate its participation in broader optical sensing markets.

• Optical digital interfaces

  Optical SPDIF

  Optical SPDIF products provide digital music and signal-transmission interfaces. The reference material identifies applications in acoustic systems, mobile phones, and personal-computer mainboards, placing this product line in digital audio and communications hardware rather than general illumination.

• LED lighting engineering service · 2011

  LDMS

  LDMS is an Edison-Opto service program that integrates thermal management, electrical design, mechanical refinement, and optical optimization. It is intended to address the complete engineering chain involved in applying high-power LEDs to lighting products, helping connect component selection with system-level performance.

• 2011

  Move into integrated LED lighting application servicesStrategy

  Background

  Edison-Opto's historical business included high-power LED components and modules, but lighting-system performance also depends on heat control, electrical design, mechanical construction, and optical output.

  Action taken

  The company launched LDMS in the first quarter of 2011 to combine thermal management, electrical scheme or design, mechanical refinement, and optical optimization within an integrated service offering.

  Aftermath

  The available reference material does not provide quantified commercial results or later program developments.

  Source

• 2010

  Public-market listing in TaiwanOther

  Background

  After years of operation and geographic expansion, Edison-Opto entered the public capital market.

  Action taken

  The company completed an initial public offering and was listed on the Taiwan Stock Exchange in the fourth quarter of 2010.

  Aftermath

  The supplied source confirms the listing but does not provide offering size, valuation, proceeds, or subsequent financial outcomes.

  Source

1. 1Edison-Optoen.wikipedia.org