ENOMICS E-Charging Technology GmbH

ENOMICS E-Charging Technology GmbH is an Austrian company that develops and builds the ENOMICS E-Ladebox, a wall-mounted charging box for electric vehicles. The product is positioned around three claims: robustness, safety and individuality. Its housing is milled in one piece from an 8 mm aluminium profile tube; the profile is produced in Europe to ENOMICS' design and then milled and assembled in Austria. Front plate and rear side are fitted into the milled housing with seals, so the box can be disassembled and repaired. According to the company, the enclosure is splash-water protected to IP 4.6 and can be installed outdoors, withstanding rain, snow and ice. The charging box is designed to charge any electric car around the clock. Its maximum charging current can be set with a rotary switch inside the housing to match charging needs and the limits of the building installation. Two control inputs and one signal output allow the box to be controlled externally, for example by a timer or by actuators of any home automation system. A MODBUS interface (Modbus-RTU) is provided for further functions. The company presents the box as a durable, repairable and individually adaptable charging solution rather than a mass-market consumer gadget. ENOMICS is a small Austrian technology company. Its official website is enomics.at, and the product is documented on a dedicated page for the E-Ladebox. The company is not publicly listed and no parent company or owner is stated in the available evidence. Its market focus is Austria and Europe, consistent with the statement that the aluminium profile is made in Europe and the box is milled and assembled in Austria.

ENOMICS E-Charging Technology GmbH is an Austrian company active in electric-vehicle charging technology. It is known for the ENOMICS E-Ladebox, a charging box for electric cars. The company's own product page describes the design and manufacturing approach in detail: the housing is milled in one piece from an 8 mm aluminium profile tube, the profile is produced in Europe according to ENOMICS' design, and the box is milled and assembled in Austria. Front plate and rear side are mounted into the milled housing with seals, which allows the box to be disassembled and repaired. The enclosure is described as splash-water protected to IP 4.6 and suitable for outdoor installation, resisting rain, snow and ice. Functionally, the E-Ladebox is presented as a universal charger for any electric car, operating around the clock. The maximum charging current can be adjusted via a rotary switch inside the housing to suit charging needs and the constraints of the building installation. Two control inputs and one signal output allow external control, for example via a timer or actuators from any home automation system. A MODBUS interface (Modbus-RTU) is available for further functions. The company's messaging emphasises robustness, safety and individuality, and the repairable construction is highlighted as a durability feature. The available evidence does not state a founding year, founder, ownership structure or executive team. ENOMICS is not publicly listed. Its official website is enomics.at, and the product is documented on a dedicated page. The company appears to operate as a small Austrian manufacturer serving the Austrian and European market, with production steps split between European profile manufacturing and Austrian milling and assembly.

Robust, safe and individually configurable EV charging hardware, made in Austria with a repairable 8 mm aluminium housing.

• ENOMICS E-Ladebox

  Wall-mounted EV charging box with a one-piece 8 mm aluminium housing milled in Austria, IP 4.6 splash-water protection, adjustable maximum charging current via internal rotary switch, two control inputs, one signal output and a Modbus-RTU interface.

1. 1Enomics – "ENOMICS E-Ladebox: Robust – Sicher – Individuell"enomics.at
2. 2ENOMICS E-Charging Technology GmbH – Wikidatawikidata.org